Axiom MRC has updated all it's market research reports with the Economic Impact Analysis of COVID19 Pandemic on the market. Our team of analyst are following Comprehensive Three Dimensional (3D) Research Methodology along with large number primary interviews with key industry participants to bring insightful market reports to meet the current market requirements.
Carbon nanotubes are tubes made-up of carbon with diameter typically measured in nanometers. They are also refer to as tubes with an undetermined carbon wall structure. They are of two types, single-walled carbon nanotubes with a diameter of less than 1 nanometer (nm) or multi-walled carbon nanotubes, consisting of several concentrically interlinked nanotubes, with diameters reaching more than 100 nm. Their length can reach several micrometers or even millimeters. Carbon nanotubes are chemically bonded with sp2 bonds, an extremely strong form of molecular interaction and therefore are the strongest and stiffest materials discovered in terms of tensile strength and elastic modulus.
Europe holds the second positon for the carbon nanotubes market Carbon nanotubes are emerging as light-weight alternative to copper wire and due to low carbon emission and good fuel efficiency, the manufacturers are increasingly adopting the use of carbon nanotubes instead of copper wire. Also, the increasing demand from end use industries. CNTs in an epoxy material increases strength and mechanical properties, so used as composite materials in bullet-proof jackets and sporting goods. However, environmental concerns and health & safety issues may hamper the market growth.
COVID 19 had a significant impact on the carbon nanotubes market. The demand for carbon nanotubes was decreased from electronics industry. Also, due to temporary lockdown the various end user had decreased the use and thus, the demand for carbon nanotubes. Moreover, the worldwide lockdown led to the economic loss and also therefore, the purchasing patterns changed which affected the market in a negative way. The travelling restriction also brought a break in a supply chain.
In Europe, the market for carbon nanotubes is segmented based upon the type, method and the end- use industry.
Based on different types, the European carbon nanotube is segmented into single walled carbon nanotubes and multi-walled carbon nanotubes. Among these two, the multi-walled carbon nanotubes hold the larger market share owing to properties such as good electrical conductivity. Due to these, they are widely used in conductive transparent electrodes, conductive heating films, conductive nano-inks, nano-devices, displays, etc. which attributes to the segment growth.
Based on different methods, the European market is segmented into chemical vapor deposition, catalytic chemical vapor deposition, high pressure monoxide reactions and others. Among these, the chemical vapor deposition holds the largest market owing to the commercial adoption of various chemical vapor deposition methods by the key players.
In Europe, the different end use industries of the carbon nanotubes Electronics & Semiconductors, Energy & Storage, Chemical Material & Polymers, Medical, Structural Composites Applications, Others. The electronics and semiconductor segment holds the prominent market owing to increasing use of carbon nanotubes. However, over the forecast period, medical segment is anticipated to grow at faster rate.
The various countries studied across the Europe are UK, Germany, Spain, Italy, France. Among these, the Germany holds the largest market owing to increasing use of carbon nanotubes by various industries in the region. Followed by Germany is U.K and Italy and France.
The various key players in the European region are LG Chemical Limited, Cabot Corporation, Showa Denko K.K., Jiangsu Cnano Technology Co. Ltd., Chengdu Organic Chemicals Co. Ltd., Nanocyl SA, Arkema SA, Cheap Tubes, Inc., Hanwha Corporation, Arry International Group Limited, Carbon Solutions, Inc., OCSiAl, Kumho Petrochemical Co. Ltd., Klean Commodities, Thomas Swan & Co. Limited, Raymor, Nanolab Inc., Nanoshel LLC, Chasm Advanced Materials, Inc., Nanothinx S.A.,, Nano-C Inc., Inc., Reinste Nano Ventures Future-Carbon, Hyperion Catalysis International, Inc.,
Carbon nanotubes are tubes made-up of carbon with diameter typically measured in nanometers. They are also refer to as tubes with an undetermined carbon wall structure. They are of two types, single-walled carbon nanotubes with a diameter of less than 1 nanometer (nm) or multi-walled carbon nanotubes, consisting of several concentrically interlinked nanotubes, with diameters reaching more than 100 nm. Carbon nanotubes are chemically bonded with sp2 bonds, an extremely strong form of molecular interaction and therefore are the strongest and stiffest materials discovered in terms of tensile strength and elastic modulus. Europe holds the second positon for the carbon nanotubes market Carbon nanotubes are emerging as light-weight alternative to copper wire and due to low carbon emission and good fuel efficiency, the manufacturers are increasingly adopting the use of carbon nanotubes instead of copper wire. Also, the increasing demand from end use industries. CNTs in an epoxy material increases strength and mechanical properties, so used as composite materials in bullet-proof jackets and sporting goods
Based on different types, the carbon nanotube is segmented into single walled carbon nanotubes and multi-walled carbon nanotubes. Among these two, the multi-walled carbon nanotubes hold the larger market share owing to properties such as good electrical conductivity. Based on different methods, the market is segmented into chemical vapor deposition, catalytic chemical vapor deposition, high pressure monoxide reactions and others. Among these, the chemical vapor deposition holds the largest market owing to the commercial adoption of various chemical vapor deposition methods by the key players. The different end use industries of the carbon nanotubes Electronics & Semiconductors, Energy & Storage, Chemical Material & Polymers, Medical, Structural Composites Applications, Others. The electronics and semiconductor segment holds the prominent market owing to increasing use of carbon nanotubes.
The various key players in the region are LG Chemical Limited, Cabot Corporation, Showa Denko K.K., Jiangsu Cnano Technology Co. Ltd., Chengdu Organic Chemicals Co. Ltd., Nanocyl SA, Arkema SA, Cheap Tubes, Inc., Hanwha Corporation, Arry International Group Limited, Carbon Solutions, Inc., OCSiAl, Kumho Petrochemical Co. Ltd., Klean Commodities, Thomas Swan & Co. Limited.
Why to buy this report:
